Wholesale D2planer Knives - PLASTIC MOULD STEEL – Histar
Wholesale D2planer Knives - PLASTIC MOULD STEEL – Histar Detail:
PLASTIC MOULD STEEL DIE BLOCK
Property:
- Wear resistance
- Polishability
- Machinability
- Toughness and hardness
- Thermal conductivity
Application:
MOULD STEELS typically have lower carbon content—0.36 to 0.40% and chromium and nickel are the main alloying elements. These characteristics allow these materials to be polished to an extremely high finish.
Mainly Plastic Mould Steel Grade No. we supplied:
HISTAR |
DIN |
ASTM |
JIS |
HSM83 | 1.2083 | 420 | SUS420 |
HSM 16 | 1.2316 | ||
HSM11 | 1.2311 | P20 | |
HSM38 | 1.2738 | P20+Ni |
CHEMICAL COMPOSITION
HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
PROPERTY |
APPLICATION |
||||||||
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
Ni |
|||||
HSM83 |
1.2083 |
|
0.36-0.42 |
≤ 1.0 |
≤ 1.0 |
0.030 |
0.030 |
12.50-14-50 |
|
≤ 0.20 |
(0.60) |
supreme polishability, good corrosion resistance, and good wear resistance. material of choice for the manufacture of plastic molding tools that require the highest lens-quality polished fi nishes |
molds for compact disks (CDs), medical laboratory equipment, optical lenses, and other components, which require critical surface fi nishes. |
HSM16 |
1.2316 |
|
0.33-0.45 |
≤ 1.0 |
≤ 1.50 |
0.030 |
0.030 |
15.5-17.5 |
0.80-1.30 |
- |
≤ 1.00 |
high cleanliness/homogeneity, powerful in resistant to rust and corrosion, good polishability, usually supplied in quenched and tempered condition with a working hardness of approximately 300 HB. |
For Mould with strong corrupt resisting used for camera lens, Dies for pressing chemically aggressive compounds |
HSM11 |
1.2311 |
P20 |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.25 |
- |
- |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB that is characterized by good toughness at moderate strength level good polishability and etching ability, adequate corrosion resistance, and cost efficient machining properties. |
Plastic molds, Mold frames for plastic molds and pressure casting dies, Heated recipient casings and tooling and for die casting dies for zinc. |
HSM38 |
1.2738 |
P20+Ni |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.35 |
- |
0.90-1.20 |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB The high nickel content (1%) is specially adapted to ensure a perfect homogeneity of structure and hardness through thickness even for very thick blocks, good polishability, adequate corrosion resistance, good machinability. |
Large size Plastic Injection and blow moulding dies, mould frame for pressure casting dies, Heated recipient casings |
Size:
PRODUCT |
DELIVERY CONDITION AND AVAILABLE DIMENSIONS |
|||
ROUND BAR |
COLD DRAWING |
CENTERLESS GROUND |
PEELED |
TURNED |
DIAMETER IN MM |
16-75 |
75-250 |
||
FLAT BAR |
HOT ROLLED BLACK |
FORGED BLOCK ALL SIDE MILLED |
||
THICK X WIDTH IN MM |
15X80-150X1000 |
80X500-200X1000 |
Product detail pictures:
Related Product Guide:
Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Wholesale D2planer Knives - PLASTIC MOULD STEEL – Histar , The product will supply to all over the world, such as: Malaysia, Suriname, Singapore, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
By Lisa from United Arab Emirates - 2017.04.18 16:45
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Elaine from New Delhi - 2017.10.23 10:29