Products
-
PLASTIC MOULD STEEL
MOULD STEELS typically have lower carbon content—0.36 to 0.40% and chromium and nickel are the main alloying elements. These characteristics allow these materials to be polished to an extremely high finish. -
STAINLESS STEEL
The chemical composition of martensitic stainless steel is characterized by the addition of elements such as molybdenum, tungsten, vanadium, and niobium on the basis of different composition combinations of 0.1%-1.0%C and 12%-27%Cr. -
HOT WORK STEEL
Hot Work Tool Steel, as their name implies, are used where operating temperatures of the tool may reach levels where resistance to softening, heat checking and shock is important ,It has high heat resistance and medium wear resistance, Distortion in hardening is slow -
HIGH SPEED STEEL
HIGH SPEED steels have been named to show their ability to resist softening at elevated temperatures therefore maintaining a sharp cutting edge when cuts are heavy and speeds are high. They are the most highly alloyed of all of the tool steel types. -
COLD WORK STEEL
Mainly Cold Work Steel Grade No. We Supplied: HISTAR DIN ASTM JIS HSC 2 1.2379 D2 SKD11 HSC3 1.2083 D3 SKD1 HSC1 1.2510 O1 SKS93 HSC7 HSC8 Bohler K340 HSC9 1.2327 Bohler K310 C28 1.2631 A8 Mod. HSC50 1.2550 S1 CHEMICAL COMPOSITION: HISTAR DIN ASTM CHEMICAL COMPOSITION C Si Mn P≤ S≤ Cr Mo V W HSC2 1.2379 D2 1.45-1.60 0.10-0.60 0.20-0.60 0.030 0.030 11.0-13.0 0.70-1.00 0.70-1.00 - ... -
HSS CIRCULAR SAW BLADES
HSS CIRCULAR SAW BLADES TICN COATING is a multilayer coating with high hardness, low fricition coefficient ,better wear resistance and anti-adhesion,which can further improve the sawing speed and service life of the saw blade. -
TCT COLD SAW FOR SOLID MATERIAL
TCT COLD SAW series is developed to meet customers high-speed sawing of material bars and thick-walled tubes.It is divided into hard alloy cutter heads and cermet cutter heads according to different application. -
TCT COLD SAW FOR FEROUS PIPE CUTTING
Automotive industry high tensile strength ferrous material pipe sawing Carbon Steel ,Alloy steel pipe cutting Seamless steel pipe, welded pipe cutting -
SHREDDER KNIVES
Characteristic: shredder knives most often of square or circular shape shredder knives of hardness 52 to 59 HRC, lower hardness recommended for materials with admixture of metals heat treatment made in a special computer-controlled furnace other components for crushing machines: stator knives an -
CHIPPER KNIVES
Material: special chipper steel developed for manufacture of chipper and flaker knives application: Chipper knives crushing of waste timber, cutting timber to chips intended for flaking -
MILLED FLATS
APPLICATIONS :Milled Flat bar used for Punch mold ,knives ,screw mould , Chinaward mould . Advantage :This series products reduce the production cost and improve efficiency for manufactures -
MOULD STEEL HOLLOW BAR 1.2344-H13
Our products have been used in all kinds of areas, such as aviation,aerospace,navigation,nuclear energy,chemical industry,electronic information,achine manufacture, petrochemical, automotive,instrument and meter, Communication , transportation, and medical instruments, etc.