HSS CIRCULAR SAW BLADES
HSS CIRCULAR SAW BLADES TICN COATING
HSS CIRCULAR SAW BLADES TiAIN COATING
Property and Appilication
HSS CIRCULAR SAW BLADES TICN COATING is a multilayer coating with high hardness, low fricition coefficient ,better wear resistance and anti-adhesion,which can further improve the sawing speed and service life of the saw blade. HSS CIRCULAR SAW BLADES TICN COATING has a very significant effect in cutting highly viscous metals such as copper and stainless steel workpieces .
Property and Appilication
This is a new type of composite anti-wear coating with high hardness.high temperatures resistance ,good thermal hardness and strong adhesion. It especially suitable for cutting high alloy steel ,stainless steel and other high strength material .It is also recommended for cutting thick –walled tubes and Solid workpieces. Due to its high oxidation temperature and low thermal conductivity ,it is especially suitable for dry cutting
HSS CIRCULAR SAW BLADES VAPO COATING
HSS CIRCULAR SAW BLADES TIN COATING
Property and Appilication
. HSS CIRCULAR SAW BLADES VAPO COATING Helps to enhance the self-lubricating ability of the saw blade,maintain the the toughness if the saw blade during operation,increase the service life of the saw blade, and is suitable for sawing low tensile strength material. It Affordable coating .
Property and Appilication
HSS CIRCULAR SAW BLADES TIN COATING，TiN coating obtained low friction coefficient against metal workpiece.it increase saw blade surface hardness ,heat resistance ,tenacity ,abrasion resistance and anti-adhesion to protect saw blade; it guarantee higher cutting speed and avoid of burr or scraps adhered to the blade tooth ,it a cost –effective coating .
|
HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
|||||||
|
C |
Si |
Mn |
Cr |
Mo |
V |
W |
Co |
|||
|
HSG6 |
1.3343 |
M2 |
0.86-0.94 |
0.20-0.45 |
0.20-0.40 |
3.75-4.50 |
4.50-5.50 |
1.70-2.10 |
5.50-6.70 |
- |
|
HSG35 |
1.3243 |
M35 |
0.87-0.95 |
0.20-0.45 |
0.20-0.45 |
3.75-4.50 |
4.50-5.50 |
1.70-2.10 |
5.50-6.70 |
4.50-5.00 |
|
HSG42 |
1.3247 |
M42 |
1.05-1.15 |
0.15-0.65 |
0.15-0.40 |
3.50-4.25 |
9.0-10.0 |
0.95-1.35 |
1.15-1.85 |
7.75-8.75 |
|
HSG18 |
1.3355 |
T1 |
0.65-0.75 |
0.20-0.45 |
0.20-0.45 |
3.75-4.50 |
- |
0.90-1.30 |
17.25-18.75 |
- |