Hot sale A8/1.2361 Chipper Knives - PLASTIC MOULD STEEL – Histar
Hot sale A8/1.2361 Chipper Knives - PLASTIC MOULD STEEL – Histar Detail:
PLASTIC MOULD STEEL DIE BLOCK
Property:
- Wear resistance
- Polishability
- Machinability
- Toughness and hardness
- Thermal conductivity
Application:
MOULD STEELS typically have lower carbon content—0.36 to 0.40% and chromium and nickel are the main alloying elements. These characteristics allow these materials to be polished to an extremely high finish.
Mainly Plastic Mould Steel Grade No. we supplied:
HISTAR |
DIN |
ASTM |
JIS |
HSM83 | 1.2083 | 420 | SUS420 |
HSM 16 | 1.2316 | ||
HSM11 | 1.2311 | P20 | |
HSM38 | 1.2738 | P20+Ni |
CHEMICAL COMPOSITION
HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
PROPERTY |
APPLICATION |
||||||||
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
Ni |
|||||
HSM83 |
1.2083 |
|
0.36-0.42 |
≤ 1.0 |
≤ 1.0 |
0.030 |
0.030 |
12.50-14-50 |
|
≤ 0.20 |
(0.60) |
supreme polishability, good corrosion resistance, and good wear resistance. material of choice for the manufacture of plastic molding tools that require the highest lens-quality polished fi nishes |
molds for compact disks (CDs), medical laboratory equipment, optical lenses, and other components, which require critical surface fi nishes. |
HSM16 |
1.2316 |
|
0.33-0.45 |
≤ 1.0 |
≤ 1.50 |
0.030 |
0.030 |
15.5-17.5 |
0.80-1.30 |
- |
≤ 1.00 |
high cleanliness/homogeneity, powerful in resistant to rust and corrosion, good polishability, usually supplied in quenched and tempered condition with a working hardness of approximately 300 HB. |
For Mould with strong corrupt resisting used for camera lens, Dies for pressing chemically aggressive compounds |
HSM11 |
1.2311 |
P20 |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.25 |
- |
- |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB that is characterized by good toughness at moderate strength level good polishability and etching ability, adequate corrosion resistance, and cost efficient machining properties. |
Plastic molds, Mold frames for plastic molds and pressure casting dies, Heated recipient casings and tooling and for die casting dies for zinc. |
HSM38 |
1.2738 |
P20+Ni |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.35 |
- |
0.90-1.20 |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB The high nickel content (1%) is specially adapted to ensure a perfect homogeneity of structure and hardness through thickness even for very thick blocks, good polishability, adequate corrosion resistance, good machinability. |
Large size Plastic Injection and blow moulding dies, mould frame for pressure casting dies, Heated recipient casings |
Size:
PRODUCT |
DELIVERY CONDITION AND AVAILABLE DIMENSIONS |
|||
ROUND BAR |
COLD DRAWING |
CENTERLESS GROUND |
PEELED |
TURNED |
DIAMETER IN MM |
16-75 |
75-250 |
||
FLAT BAR |
HOT ROLLED BLACK |
FORGED BLOCK ALL SIDE MILLED |
||
THICK X WIDTH IN MM |
15X80-150X1000 |
80X500-200X1000 |
Product detail pictures:
Related Product Guide:
Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Hot sale A8/1.2361 Chipper Knives - PLASTIC MOULD STEEL – Histar , The product will supply to all over the world, such as: Ghana, Finland, Bangalore, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Susan from Singapore - 2017.10.23 10:29
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Hellyngton Sato from India - 2018.10.31 10:02