Factory Cheap Hot Hot Work Tool Steel Milled Die Block 1.2344/H13/ Skd61 - HOT WORK STEEL – Histar
Factory Cheap Hot Hot Work Tool Steel Milled Die Block 1.2344/H13/ Skd61 - HOT WORK STEEL – Histar Detail:
Mainly HOT WORK STEEL Grade No. We Supplied:
HISTAR |
GB(CHINA) |
DIN |
ASTM |
JIS |
HSH 13 | 4Cr5MoSiV1 | 1.2344 | H13 | SKD61 |
HSH11 | 4Cr5MoSiV | 1.2343 | H11 | SKD6 |
HSH12 | 4Cr5MoWSiV | 1.2606 | H12 | SKD62 |
HSH10 | 4Cr3Mo3SiV | 1.2365 | H10 | SKD7 |
HSH21 | 3Cr2W8V | 1.2581 | H21 | SKD5 |
HSH6 | 5CrNiMo | 1.2714 | L6 |
CHEMICAL COMPOSITION
HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
PROPERTY |
APPLICATION |
||||||||
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
W |
|||||
HSH13 |
1.2344 |
H13 |
0.35-0.42 |
0.80-1.20 |
0.25-0.50 |
0.030 |
0.030 |
4.80-5.50 |
1.20-1.50 |
0.85-1.15 |
- |
High hardenability, excellent wear resistance and hot toughness. has good thermal shock resistance, (ESR) H13 has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishability and high temperature tensile strength. |
Pressure die casting tools, extrusion die, forging dies, hot shear blades, stamping dies, plastic molds, Hot work mandrels, ESR H13 is great for aluminium die-casting tools and plastic mold tools requiring a very high polish. |
HSH12 |
1.2606 |
H12 |
0.32-0.40 |
0.90-1.20 |
0.30-0.60 |
0.030 |
0.030 |
5.00-5.60 |
1.30-1.60 |
0.15-0.40 |
1.20-1.40 |
Excellent impact toughness. The tungsten content provides better temper resistance, deep-hardening, air-hardening steel that exhibits minimal size change during heat treatment. Good resistance to thermal fatigue cracking |
hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, and extrusion dies. |
YTR50 |
1.2343 |
H11 |
0.33-0.41 |
0.80-1.20 |
0.25-0.50 |
0.030 |
0.030 |
4.80-5.50 |
1.10-1.50 |
0.30-0.50 |
- |
High hardenability, excellent toughness, good resistance to thermal shock when water cooled in service, minimal size change during heat treatment. |
Recommended for hot tooling applications where maximum resistance to cracking is required. Hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, extrusion dies. |
HSH10 |
1.2365 |
H10 |
0.28-0.35 |
0.10-0.40 |
0.15-0.45 |
0.030 |
0.030 |
2.70-3.20 |
2.50-3.00 |
0.40-70 |
- |
Excellent resistance to softening at elevated temperature. very resistant to thermal fatigue cracking, and can be water cooled in service |
Heavy metal Die-casting tools, Piercing Mandrels, Hot punches, forging dies, hot shear blades |
HSH21 |
1.2581 |
H21 |
0.25-0.35 |
0.10-0.40 |
0.15-0.45 |
0.030 |
0.030 |
2.50-3.20 |
- |
0.30-0.50 |
8.50-9.50 |
Exhibits excellent resistance to softening at elevated temperature. Should not be water cooled in service unless the tool includes a continuous flow of internal water cooling. Thermal shock should be avoided |
Recommended for difficult hot work tooling applications such as brass extrusion, brass die casting dies, hot punches, forging die inserts. |
HSH6 |
1.2714 |
L6 |
0.50-0.60 |
0.10-0.40 |
0.60-0.90 |
0.030 |
0.030 |
0.80-1.20 |
0.35-0.55 |
0.05-0.15 |
Ni 1.50-1.80 |
High impact toughness and good resistance to softening at elevated temperature. good resistance to thermal shock and thermal fatigue cracking, small dimensional changes during hardening. |
Die forging, die casting, extrusion, glass processing,. Mandrels, Die holders |
Mainly Cold Work Tool Steel Grade No. we supplied:
PRODUCT |
DELIVERY CONDITION AND AVAILABLE DIMENSIONS |
|||
ROUND BAR |
COLD DRAWING |
CENTERLESS GROUND |
PEELED |
TURNED |
DIAMETER IN MM |
2.5-12.0 |
8.5-16 |
16-75 |
75-610 |
SQUARE |
HOT ROLLED BLACK |
FORGED ALL SIDE MILLED |
||
SIZE IN MM |
6X6-50X50 |
55X55-510X510 |
||
FLAT BAR |
HOT ROLLED BLACK |
FORGED ALL SIDE MILLED |
||
THICK X WIDTH IN MM |
3-40 X 12-610 |
80-405 X 100-810 |
||
DISC |
350-800MM DIA X80-400 THICK |
Product detail pictures:
Related Product Guide:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory Cheap Hot Hot Work Tool Steel Milled Die Block 1.2344/H13/ Skd61 - HOT WORK STEEL – Histar , The product will supply to all over the world, such as: Madrid, Brunei, Malaysia, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
By Janice from Italy - 2017.06.29 18:55
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Iris from Swiss - 2017.03.07 13:42