COLD WORK STEEL
Cold Work Tool Steel Forged Round bar
Cold Work Tool Steel Flat bar
Cold Work Tool Steel Milled Die Block
Cold Work Tool Steel Sheets
Property:
- Very good wear resistance
- High pressure resistance
- Great toughness
Application:
The high carbon and chromium content promotes deep hardening. Hardenability is accentuated by small amounts of tungsten and molybdenum. Dimensional change in hardening is extremely low.
Typical uses are long run blanking, stamping, and cold forming dies; lamination dies; thread rolling dies; trimmer dies; slitters; brick mold liners; Work Rolls.
Mainly Cold Work Steel Grade No. We Supplied:
| HISTAR |
DIN |
ASTM |
JIS |
| HSC 2 | 1.2379 | D2 | SKD11 |
| HSC3 | 1.2083 | D3 | SKD1 |
| HSC1 | 1.2510 | O1 | SKS93 |
| HSC7 | |||
| HSC8 | Bohler K340 | ||
| HSC9 | 1.2327 | Bohler K310 | |
| C28 | 1.2631 | A8 Mod. | |
| HSC50 | 1.2550 | S1 |
CHEMICAL COMPOSITION:
| HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
||||||||
|
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
W |
|||
| HSC2 |
1.2379 |
D2 |
1.45-1.60 |
0.10-0.60 |
0.20-0.60 |
0.030 |
0.030 |
11.0-13.0 |
0.70-1.00 |
0.70-1.00 |
- |
|
HSC3 |
1.2080 |
D3 |
1.90-2.20 |
0.10-0.60 |
0.20-0.60 |
0.030 |
0.030 |
11.0-13.0 |
- |
- |
- |
|
HSC1 |
1.2510 |
O1 |
0.90-1.05 |
0.15-0.35 |
1.00-1.20 |
0.030 |
0.030 |
0.50-0.70 |
- |
0.05-0.15 |
0.50-0.70 |
|
YTL28 CHIPPER |
1.2631 Modified |
A8 Modified |
0.50 |
0.90 |
0.35 |
0.030 |
0.030 |
8.00 |
1.50 |
0.40 |
< 1.75 |
|
HSC11 |
1.2550 |
S1 |
0.55-0.65 |
0.70-1.00 |
0.15-0.45 |
0.030 |
0.030 |
0.90-1.20 |
- |
0.10-0.20 |
1.70-2.20 |
|
HSC17 |
1.2357 |
S7 |
0.45-0.55 |
0.20-1.00 |
0.20-0.80 |
0.030 |
0.030 |
3.00-3.50 |
1.30-1.80 |
≤ 0.35 |
- |
|
HSC31 |
1.2327 |
Bohler K310 |
0.85-1.05 |
0.25-0.45 |
0.40-0.60 |
0.030 |
0.030 |
1.70-2.00 |
0.20-0.35 |
0.05-0.20 |
- |
SIZE :
|
PRODUCT |
DELIVERY CONDITION AND AVAILABLE DIMENSIONS |
|||
|
ROUND BAR |
COLD DRAWING |
CENTERLESS GROUND |
PEELED |
TURNED |
|
DIAMETER IN MM |
2.5-12.0 |
8.5-16 |
16-75 |
75-510 |
|
SQUARE |
HOT ROLLED BLACK |
FORGED ALL SIDE MILLED |
||
|
SIZE IN MM |
6X6-50X50 |
55X55-510X510 |
||
|
FLAT BAR |
HOT ROLLED BLACK |
FORGED BLOCK ALL SIDE MILLED |
||
|
THICK X WIDTH IN MM |
3-40 X 12-610 |
80-405 X 100-810 |
||
|
STEEL SHEETS |
COLD ROLLED |
HOT ROLLED |
||
|
THICK x WIDTH xLENGTH IN MM |
1.2-3.0X600-800MM-1700-2100MM |
3.10-10.00X600-800MM-1700-2100MM |
||
|
Disc |
100-610MM DIA X1.5-10MM THICK |
|||