China wholesale 1.2311 Plastic Mould Steel Q+T - PLASTIC MOULD STEEL – Histar
China wholesale 1.2311 Plastic Mould Steel Q+T - PLASTIC MOULD STEEL – Histar Detail:
PLASTIC MOULD STEEL DIE BLOCK
Property:
- Wear resistance
- Polishability
- Machinability
- Toughness and hardness
- Thermal conductivity
Application:
MOULD STEELS typically have lower carbon content—0.36 to 0.40% and chromium and nickel are the main alloying elements. These characteristics allow these materials to be polished to an extremely high finish.
Mainly Plastic Mould Steel Grade No. we supplied:
HISTAR |
DIN |
ASTM |
JIS |
HSM83 | 1.2083 | 420 | SUS420 |
HSM 16 | 1.2316 | ||
HSM11 | 1.2311 | P20 | |
HSM38 | 1.2738 | P20+Ni |
CHEMICAL COMPOSITION
HISTAR |
DIN |
ASTM |
CHEMICAL COMPOSITION |
PROPERTY |
APPLICATION |
||||||||
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
Ni |
|||||
HSM83 |
1.2083 |
|
0.36-0.42 |
≤ 1.0 |
≤ 1.0 |
0.030 |
0.030 |
12.50-14-50 |
|
≤ 0.20 |
(0.60) |
supreme polishability, good corrosion resistance, and good wear resistance. material of choice for the manufacture of plastic molding tools that require the highest lens-quality polished fi nishes |
molds for compact disks (CDs), medical laboratory equipment, optical lenses, and other components, which require critical surface fi nishes. |
HSM16 |
1.2316 |
|
0.33-0.45 |
≤ 1.0 |
≤ 1.50 |
0.030 |
0.030 |
15.5-17.5 |
0.80-1.30 |
- |
≤ 1.00 |
high cleanliness/homogeneity, powerful in resistant to rust and corrosion, good polishability, usually supplied in quenched and tempered condition with a working hardness of approximately 300 HB. |
For Mould with strong corrupt resisting used for camera lens, Dies for pressing chemically aggressive compounds |
HSM11 |
1.2311 |
P20 |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.25 |
- |
- |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB that is characterized by good toughness at moderate strength level good polishability and etching ability, adequate corrosion resistance, and cost efficient machining properties. |
Plastic molds, Mold frames for plastic molds and pressure casting dies, Heated recipient casings and tooling and for die casting dies for zinc. |
HSM38 |
1.2738 |
P20+Ni |
0.35-0.45 |
0.20-0.40 |
1.30-1.60 |
0.030 |
0.030 |
1.80-2.10 |
0.15-0.35 |
- |
0.90-1.20 |
Prehardened plastic mold steel, hardness in as-supplied condition 280-320 HB The high nickel content (1%) is specially adapted to ensure a perfect homogeneity of structure and hardness through thickness even for very thick blocks, good polishability, adequate corrosion resistance, good machinability. |
Large size Plastic Injection and blow moulding dies, mould frame for pressure casting dies, Heated recipient casings |
Size:
PRODUCT |
DELIVERY CONDITION AND AVAILABLE DIMENSIONS |
|||
ROUND BAR |
COLD DRAWING |
CENTERLESS GROUND |
PEELED |
TURNED |
DIAMETER IN MM |
16-75 |
75-250 |
||
FLAT BAR |
HOT ROLLED BLACK |
FORGED BLOCK ALL SIDE MILLED |
||
THICK X WIDTH IN MM |
15X80-150X1000 |
80X500-200X1000 |
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for China wholesale 1.2311 Plastic Mould Steel Q+T - PLASTIC MOULD STEEL – Histar , The product will supply to all over the world, such as: Australia, Kuwait, Hyderabad, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
By Victor from Philippines - 2018.09.16 11:31
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Amy from Israel - 2017.05.21 12:31